I have standardized on RP25/110 standards using code 100 rail and I use On3 track gauges to represent two-foot gauge. The points are DCC compatible.
For more details of trackmaking using the following parts click here to go to the track overview page.
Parts are available as follows:
Point Bases |
Price |
|
| Right Hand | £3.50 | |
| Left Hand | £3.50 | |
| Y | £3.50 | |
| Curved | £2.50 | |
| Straight | £2.50 | |
| Postage per order | £2.00 |
Point kits now available.
Other Parts |
Price |
|
| Point Kit L/H, R/H, Y each | £19.50 | |
| #2 Crossing Vee Silver-soldered | £4.50 | |
| #2 Y-point Vee Silver-soldered | £4.50 | |
| Spikes | NYA | |
| B-B Gauge | £4.50 |
Point kits include silver-soldered Vee, curved and machined rails, tie-bar and rail fixing spikes. Some rails will need to be trimmed to length. Feed wire, solder, paint and glue (if used) are not included.